beginning stunt prep on 04 636
03-06-2007, 08:17 PM
#1
life is good......BRAAAP!
Thread Starter
Join Date: Dec 2004
Location: MASS.
Age: 48
Posts: 1,252
beginning stunt prep on 04 636
a crashed 04 636 , has recently came into my shop and I picked it up for mad cheap. So I am starting to order all the basic necessities , but im on the fence with a couple selections such as:
cage- sick innovations or powers stuntworx? /Ive been using a 905 for a couple years bolts have never lined up right.
12 bar- sick innovations flat or powers stuntworx? / Ive been using a homade welded one , no matter how hard I hit it the sub withstands it cause it just bends.
extended brake / throttle lines for DB bars? I havent really tried to find em yet.
if you have experience with both cages and bars , the input could be helpful
thanx
cage- sick innovations or powers stuntworx? /Ive been using a 905 for a couple years bolts have never lined up right.
12 bar- sick innovations flat or powers stuntworx? / Ive been using a homade welded one , no matter how hard I hit it the sub withstands it cause it just bends.
extended brake / throttle lines for DB bars? I havent really tried to find em yet.
if you have experience with both cages and bars , the input could be helpful
thanx
03-06-2007, 08:36 PM
#3
Squid Extradoinaire
Join Date: Oct 2005
Location: NE INDIANA
Age: 39
Posts: 5,892
Re: beginning stunt prep on 04 636
you dont need extended throttle cables. mine work good.
brake lines... if you wanna go a cheap route just pick some Honda 919 front line up from a dealer. works good.
12 bar... the powers is way too long. alot of people cut them down. id go sick
as for cage... id say MXD... i really like their design. EXCEPT im making my custom cage tomorrow and will make more custom one offs. it will be mad to not roll over, hit your shins, etc, etc... made by a rider etc...its gonna be creative.
ill show you picks if you like it you can buy one. it will come with sliders and be about the same price as a sick cage or a little more. plus its probably gonna come with a lifetime warranty and WILL be the ONLY cage made that TIG welded that i know of. the quality of weld will be very high rate. not the usual production MIG job.
http://www.neukin.com a good good buddy of mine owns this and i weld for him when he gets backed up. He wants to possibly expand and this is what hes gonna get into.
brake lines... if you wanna go a cheap route just pick some Honda 919 front line up from a dealer. works good.
12 bar... the powers is way too long. alot of people cut them down. id go sick
as for cage... id say MXD... i really like their design. EXCEPT im making my custom cage tomorrow and will make more custom one offs. it will be mad to not roll over, hit your shins, etc, etc... made by a rider etc...its gonna be creative.
ill show you picks if you like it you can buy one. it will come with sliders and be about the same price as a sick cage or a little more. plus its probably gonna come with a lifetime warranty and WILL be the ONLY cage made that TIG welded that i know of. the quality of weld will be very high rate. not the usual production MIG job.
http://www.neukin.com a good good buddy of mine owns this and i weld for him when he gets backed up. He wants to possibly expand and this is what hes gonna get into.
Last edited by Vetter; 03-06-2007 at 08:39 PM.
03-07-2007, 12:07 AM
#4
life is good......BRAAAP!
Thread Starter
Join Date: Dec 2004
Location: MASS.
Age: 48
Posts: 1,252
Re: beginning stunt prep on 04 636
And Vetter youre making a cage ,like for production or just a few? post up some pics. I'll check it out. thanx
03-07-2007, 12:18 AM
#5
I Enjoy Posting At StuntLife!
Join Date: Apr 2006
Location: the bay, ca, usa
Age: 39
Posts: 2,445
Re: beginning stunt prep on 04 636
[quote=-nelson;2653767]a crashed 04 636 , has recently came into my shop and I picked it up for mad cheap. So I am starting to order all the basic necessities , but im on the fence with a couple selections such as:
cage- sick innovations or powers stuntworx? /Ive been using a 905 for a couple years bolts have never lined up right.
12 bar- sick innovations flat or powers stuntworx? / Ive been using a homade welded one , no matter how hard I hit it the sub withstands it cause it just bends.
extended brake / throttle lines for DB bars? I havent really tried to find em yet. [/qoute]
out of the 2 cages get the stuntworx,sick innovations flat bar,lines'll work fine stock they got good length
cage- sick innovations or powers stuntworx? /Ive been using a 905 for a couple years bolts have never lined up right.
12 bar- sick innovations flat or powers stuntworx? / Ive been using a homade welded one , no matter how hard I hit it the sub withstands it cause it just bends.
extended brake / throttle lines for DB bars? I havent really tried to find em yet. [/qoute]
out of the 2 cages get the stuntworx,sick innovations flat bar,lines'll work fine stock they got good length
03-07-2007, 01:02 AM
#7
Registered User
Join Date: May 2004
Location: Bowling Green, KY
Age: 42
Posts: 931
Re: beginning stunt prep on 04 636
Sick Innovations all the way, bar and cag. Powers break if your learning a lot of new stuff, from experience. And MXD is good if you wanting to wait 10 years for your stuff, go with SI, trust me. Ive used them all and none compare to SI.
03-07-2007, 01:15 AM
#8
life is good......BRAAAP!
Thread Starter
Join Date: Dec 2004
Location: MASS.
Age: 48
Posts: 1,252
Re: beginning stunt prep on 04 636
right on I was initially intending on An SI,& MXD is an extra 30 bucks so that told me that it must have a little more to offer than the SI. But it seems this is an obvious general consensus. SI seems to be the way to go for bar and cage. gracious(-I think thats how its spelled?)
03-07-2007, 11:27 PM
#10
sickinnovations.com
Join Date: Mar 2004
Location: EVANSVILLE
Age: 45
Posts: 2,217
Thread
Thread Starter
Forum
Replies
Last Post
