02 GSXR 1K engine cuts out in endo
#3
?
I've never heard of that but the kill switch idea sounds pretty reasonable. Watch out for the exup valve messing up. Mine just started going retarded last month. It makes these wack popping sounds. I checked it out and the gear sometimes gets stuck while its turning the fuel pump on. Also, sometimes when popping the clutch in 2nd gear, my bike tends to loose all ***** instantly. THat crap happens like 3 or 4 times a month.
#4
Re: 02 GSXR 1K engine cuts out in endo
Originally posted by DCMETRO1
Has anyone else had this problem or heard of this bike cutting out when doing a stoppie, the bike is relatively new with 700 miles, thanks,
Has anyone else had this problem or heard of this bike cutting out when doing a stoppie, the bike is relatively new with 700 miles, thanks,
is it while your doing a stoppie or when you come down from one
if its when you come down it's probably your kickstand switch.
#6
Re: Re: 02 GSXR 1K engine cuts out in endo
Originally posted by Hinks
is it while your doing a stoppie or when you come down from one
if its when you come down it's probably your kickstand switch.
is it while your doing a stoppie or when you come down from one
if its when you come down it's probably your kickstand switch.
#7
Re: Re: Re: 02 GSXR 1K engine cuts out in endo
Originally posted by DCMETRO1
its when I am coming down, will have to check out the kickstand switch, the bike started doing it as soon as I got it and it was new so thats kind of weird,
its when I am coming down, will have to check out the kickstand switch, the bike started doing it as soon as I got it and it was new so thats kind of weird,
#8
Registered User
Join Date: Oct 2002
Location: dirty jerzey
Age: 48
Posts: 34
CUT OFF
its prob the level switch under the front seat its a ball setup so if the bikes falls the ball moves and cuts off the fuel system.my man jay from S.O.I filled his with hot glue to stop it.you might be able to unplug it or connect the two wires.:
#10
mark is right. it is the kickstand switch. (gee u are smarter then mellen said u were. lol ) the tip over sensor doesn't trip durring stoppies, but u might want to fix it for 12's.
the bike doesn't shut off in the stoppie right? it's when u put it down. if so then u have your answer.
keep it on one wheel.
the bike doesn't shut off in the stoppie right? it's when u put it down. if so then u have your answer.
keep it on one wheel.
#11
Use a stronger spring on the kickstand and your problem would be fixed!
If there's problem anyway just check out http://www.gixxer.com they could help ya'
/Norris
If there's problem anyway just check out http://www.gixxer.com they could help ya'
/Norris
#14
If it is yhe crash sensor you can fill the crash sensor box with lightfluid oil! That will delay the mecanism so if you lay down the bike it'll take a few seconds for it to shut the engine of!
That way you want destroy the engine if you lay down your bike!
I have heard of people that have had engine failure while kneescrapeing on a race track (due to the crashsensor)!
That have never happened to me!
That way you want destroy the engine if you lay down your bike!
I have heard of people that have had engine failure while kneescrapeing on a race track (due to the crashsensor)!
That have never happened to me!
Thread
Thread Starter
Forum
Replies
Last Post
drewstew
Stunting Help and Advice
1
01-15-2013 09:43 AM