92954 clipon HEAVEN!!!
#23
Re: 92954 clipon HEAVEN!!!
Originally Posted by T'RIC'KY
****, the clip ons on Ebay went for 31 each, are these guys crazy?
Woo do the 636 clips hit the fairing turned so far out?
Woo do the 636 clips hit the fairing turned so far out?
#24
Re: 92954 clipon HEAVEN!!!
Originally Posted by TongWoo
They don't hit as far as I have em turned out. When I turn lock to lock I have them adjusted so that the levers barely touch when at full lock but don't get pushed in. They are angled up (when flipped), so I think it allows for a bit more room. :YEAH
Sweet, looks like I'll be gettin a pair off ebay asap.
#25
Re: 92954 clipon HEAVEN!!!
Originally Posted by TongWoo
They don't hit as far as I have em turned out. When I turn lock to lock I have them adjusted so that the levers barely touch when at full lock but don't get pushed in. They are angled up (when flipped), so I think it allows for a bit more room. :YEAH
I think IŽll get me some, just have to look out on Ebay, one day thereŽll be a cheap set....
#31
Re: 92954 clipon HEAVEN!!!
Originally Posted by MannyFresh954
yo woo whats up with your idle...? is that stock and run under your tank or is that a longer one run under the tank...?
#32
Re: 92954 clipon HEAVEN!!!
Originally Posted by TongWoo
What up, bro. I shoulda gotten a better angle because since they are flipped, your hands actually sit higher than stock.
i wanna see the whole bike.
what color is it???
#34
Re: 92954 clipon HEAVEN!!!
Yo TongWoo. Did you use the 954 throttle or did you use the **** off the 636?
I'm lookin at some on ebay right now and I don't know weather to get a set that are bare, or get a set with throttle and brake lines attached.
I'm lookin at some on ebay right now and I don't know weather to get a set that are bare, or get a set with throttle and brake lines attached.
#35
Re: 92954 clipon HEAVEN!!!
Originally Posted by Darius
back in 03 I bought a brand new 954 and took it to Bike Week. I tried soo hard to keep it minty. Was busting some pretty good stoppies on it. Then I started doing sit down circles, messed up on the clutch slipping and blipped myself into the ground. Broke the stator, smashed the tail and broke the footpegs, 2 days later I was at a bikeweek stuntshow smashing the tail into the ground. Killing the streets at night with starboyz and g nice. Prob the most fun I've had on a bike.
#36
Re: 92954 clipon HEAVEN!!!
Originally Posted by Darius
back in 03 I bought a brand new 954 and took it to Bike Week. I tried soo hard to keep it minty. Was busting some pretty good stoppies on it. Then I started doing sit down circles, messed up on the clutch slipping and blipped myself into the ground. Broke the stator, smashed the tail and broke the footpegs, 2 days later I was at a bikeweek stuntshow smashing the tail into the ground. Killing the streets at night with starboyz and g nice. Prob the most fun I've had on a bike.
you guys think lakeland was bad you should have seen the sportbike hype show spot
#37
Re: 92954 clipon HEAVEN!!!
i know im bringing up a dead threat but its better then making a whole new one, lol.....my question is where and how are you guys with the 636 clip-ons mounting your brake resivore(SP).....? also it seems like my throttle cables are to short and their kinda tight.....? if i move mine out they hit when you turn the bars all the way.....
#38
Re: 92954 clipon HEAVEN!!!
i know im bringing up a dead threat but its better then making a whole new one, lol.....my question is where and how are you guys with the 636 clip-ons mounting your brake resivore(SP).....? also it seems like my throttle cables are to short and their kinda tight.....? if i move mine out they hit when you turn the bars all the way.....
The stock throttle cables work, just find the right clip on position, you have to turn Žem a lil bit more out like you might want to, and your clutch lever will hit the upper when fully turned in to the right.
I donŽt like the throttle cable sitting so tight either, an F4i or 600RR throttle assembly might help cause the throttle cables go out on top instead of the front.....IŽll give it a try soon....
pics of my set up
#39
Re: 92954 clipon HEAVEN!!!
here are some pics of my f4i with 929 forks 03-04 636 clip-ons flipped and upside down. I love them and they dont hit the upper at all, probably the best ad on ive done yet
#40
Re: 92954 clipon HEAVEN!!!
Mount the brake reservoir straight to the master without the bracket.
The stock throttle cables work, just find the right clip on position, you have to turn Žem a lil bit more out like you might want to, and your clutch lever will hit the upper when fully turned in to the right.
I donŽt like the throttle cable sitting so tight either, an F4i or 600RR throttle assembly might help cause the throttle cables go out on top instead of the front.....IŽll give it a try soon....
pics of my set up
The stock throttle cables work, just find the right clip on position, you have to turn Žem a lil bit more out like you might want to, and your clutch lever will hit the upper when fully turned in to the right.
I donŽt like the throttle cable sitting so tight either, an F4i or 600RR throttle assembly might help cause the throttle cables go out on top instead of the front.....IŽll give it a try soon....
pics of my set up
hey thanks man....! im gonna give it a try with the res....i turned them to get the cables better but i might give the 600RR a thought.....im goning to finish that up right now and see how i make out....thanks again for the help....!