Stunt Bike Forum

gearing on cbr600rr

Thread Tools
 
Search this Thread
 
Old 10-30-2006 | 11:15 PM
  #1  
IMCprofile's Avatar
IMCprofile
Thread Starter
Registered User
 
Joined: Oct 2006
Posts: 6
From: long beach, CA, la
IMCprofile is an unknown quantity at this point
gearing on cbr600rr
i want to gear my 600rr but i ride it on the freeway wanted know if i went -1+2 what my
rpms
would be around 80 mph and if its a good start for slow wheelies
Reply
Old 10-30-2006 | 11:16 PM
  #2  
f4stunna's Avatar
f4stunna
Registered User
 
Joined: Jun 2004
Posts: 3,113
From: south central MA
f4stunna is a decent person
Re: gearing on cbr600rr
you'll be more than fine... dont worry about it....

mine geared +17 will still hit a buck


but keep the gearing mild cause they are twitchy as all hell with alot of gearing
Reply
Old 10-30-2006 | 11:19 PM
  #3  
IMCprofile's Avatar
IMCprofile
Thread Starter
Registered User
 
Joined: Oct 2006
Posts: 6
From: long beach, CA, la
IMCprofile is an unknown quantity at this point
Re: gearing on cbr600rr
what am i looking at past 10k
Reply
Old 10-30-2006 | 11:22 PM
  #4  
f4stunna's Avatar
f4stunna
Registered User
 
Joined: Jun 2004
Posts: 3,113
From: south central MA
f4stunna is a decent person
Re: gearing on cbr600rr
i coudlnt tell ya cause i dont run gauges but like i said, -1+2, dont worry about it. i ran my F4 with +10 on the highway everyday no problems and the RR has a **** load more hp than that did....
Reply
Old 10-30-2006 | 11:27 PM
  #5  
IMCprofile's Avatar
IMCprofile
Thread Starter
Registered User
 
Joined: Oct 2006
Posts: 6
From: long beach, CA, la
IMCprofile is an unknown quantity at this point
Re: gearing on cbr600rr
good to know thanks
Reply
Old 10-30-2006 | 11:41 PM
  #6  
Krazy8z's Avatar
Krazy8z
Registered User
 
Joined: Oct 2004
Posts: 230
From: Renton, WA
Krazy8z is an unknown quantity at this point
Re: gearing on cbr600rr
-1 +2 isn't much... you'll be fine on the freeway, don't even worry about it.
Reply
Old 10-31-2006 | 05:02 AM
  #7  
T-Dubby's Avatar
T-Dubby
Brap
 
Joined: Jul 2004
Posts: 10,417
From: Scottsdale, AZ
T-Dubby is a jewel in the roughT-Dubby is a jewel in the roughT-Dubby is a jewel in the roughT-Dubby is a jewel in the rough
Re: gearing on cbr600rr
Yeah with that same gearing on my 636 the speed showed 10mph faster than you were going.. Rpms only went up like 1k than normal
Reply
Old 10-31-2006 | 10:44 AM
  #8  
-SKETCHY-'s Avatar
-SKETCHY-
STUNTRIDE FRONTLINE
 
Joined: Jun 2005
Posts: 13,621
From: GEORGIA
-SKETCHY- has much to be proud of-SKETCHY- has much to be proud of-SKETCHY- has much to be proud of-SKETCHY- has much to be proud of-SKETCHY- has much to be proud of-SKETCHY- has much to be proud of-SKETCHY- has much to be proud of-SKETCHY- has much to be proud of-SKETCHY- has much to be proud of
Re: gearing on cbr600rr
my buddy kills it on his completely stock
Reply
Old 10-31-2006 | 11:32 AM
  #9  
N/A's Avatar
N/A
Registered User
 
Joined: Jun 2005
Posts: 7,259
From: N/A
N/A is an unknown quantity at this point
Re: gearing on cbr600rr
My F4i had -1/+2 up here in Colorado and that was plenty peppy... I would imagine at sea level it'll $hit and get just fine.
Reply
Old 10-31-2006 | 01:26 PM
  #10  
insanestunter39's Avatar
insanestunter39
Registered User
 
Joined: Jun 2006
Posts: 305
From: Texas State University
insanestunter39 is an unknown quantity at this point
Re: gearing on cbr600rr
Originally Posted by IMCprofile
i want to gear my 600rr but i ride it on the freeway wanted know if i went -1+2 what my
rpms

would be around 80 mph and if its a good start for slow wheelies
I ran -1, +2 for a while and it was awesome. You can still go way over 100 m.p.h. on the freeway if you're that stupid, but overall, it's alright! Go with -1, +10/-2+10( it's way better man) :YEAH
Reply
Old 10-31-2006 | 01:31 PM
  #11  
Wheeliest's Avatar
Wheeliest
Scrapes Elbow
 
Joined: May 2004
Posts: 8,833
From: Phoenix, AZ.
Wheeliest is a name known to allWheeliest is a name known to allWheeliest is a name known to allWheeliest is a name known to allWheeliest is a name known to allWheeliest is a name known to all
Re: gearing on cbr600rr
buy a 15 tooth 525 pitch sprocket and a stock usedf4i sprocket wha laa
Reply
Old 10-31-2006 | 01:33 PM
  #12  
insanestunter39's Avatar
insanestunter39
Registered User
 
Joined: Jun 2006
Posts: 305
From: Texas State University
insanestunter39 is an unknown quantity at this point
Re: gearing on cbr600rr
Originally Posted by Wheeliest
buy a 15 tooth 525 pitch sprocket and a stock usedf4i sprocket wha laa
Buy them from Thrust-Company and save some money bro.
Reply
Old 10-31-2006 | 01:39 PM
  #13  
Wheeliest's Avatar
Wheeliest
Scrapes Elbow
 
Joined: May 2004
Posts: 8,833
From: Phoenix, AZ.
Wheeliest is a name known to allWheeliest is a name known to allWheeliest is a name known to allWheeliest is a name known to allWheeliest is a name known to allWheeliest is a name known to all
Re: gearing on cbr600rr
stock used f4i sprocket = $20, sprocket specialist 15tooth steel 525 pitch 15$ or go with sweet mint good looking thrust company sprockets.
Reply
Old 10-31-2006 | 01:40 PM
  #14  
f4stunna's Avatar
f4stunna
Registered User
 
Joined: Jun 2004
Posts: 3,113
From: south central MA
f4stunna is a decent person
Re: gearing on cbr600rr
Originally Posted by Wheeliest
stock used f4i sprocket = $20, sprocket specialist 15tooth steel 525 pitch 15$ or go with sweet mint good looking thrust company sprockets.
+1 on this... the F4i sprocket bolts right up and its +3 on the rr's

DO IT!!!
Reply
Old 10-31-2006 | 01:42 PM
  #15  
insanestunter39's Avatar
insanestunter39
Registered User
 
Joined: Jun 2006
Posts: 305
From: Texas State University
insanestunter39 is an unknown quantity at this point
Re: gearing on cbr600rr
Thrust-Company are light as hell too!!! I LOVE em.:YEAH
Reply
Old 10-31-2006 | 11:45 PM
  #16  
IMCprofile's Avatar
IMCprofile
Thread Starter
Registered User
 
Joined: Oct 2006
Posts: 6
From: long beach, CA, la
IMCprofile is an unknown quantity at this point
Re: gearing on cbr600rr
so f4i rear is + 3 over my stock rear if so any year f4i to fit an 06
rr
and what is my front stock. thanks, my first thread on this site and a lot of good advise
Reply
Old 11-01-2006 | 01:26 AM
  #17  
f4stunna's Avatar
f4stunna
Registered User
 
Joined: Jun 2004
Posts: 3,113
From: south central MA
f4stunna is a decent person
Re: gearing on cbr600rr
Originally Posted by IMCprofile
so f4i rear is + 3 over my stock rear if so any year f4i to fit an 06
rr
and what is my front stock. thanks, my first thread on this site and a lot of good advise
YES.... ANY f4i sprocket will fit... and fuel injected honda rear's are the same for that matter, but the stock F4i is +3 on the RR
Reply
Old 11-01-2006 | 09:58 AM
  #18  
Wheeliest's Avatar
Wheeliest
Scrapes Elbow
 
Joined: May 2004
Posts: 8,833
From: Phoenix, AZ.
Wheeliest is a name known to allWheeliest is a name known to allWheeliest is a name known to allWheeliest is a name known to allWheeliest is a name known to allWheeliest is a name known to all
Re: gearing on cbr600rr
if you get a 15 tooth front (16 is stock) and a f4i sprocket u can use ur stock chain.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
From Denver, Looking for someone willing to teach (paid lessons)
stuntsquid101
Newbie Welcome Center
1
07-24-2016 09:51 PM
Start with gearing?
musicman3x
Stunt Discussion
1
11-20-2015 12:01 PM
Winter questions
Jacob Payne
Stunt Discussion
0
09-28-2015 01:41 PM
Hello there new to this site
FreedomPenguin
Newbie Welcome Center
0
09-08-2015 02:06 AM
Hailing from San Francisco
musicman3x
Newbie Welcome Center
2
07-14-2015 08:17 PM
Back to Subforum
Stunt Discussion
View Next Unread
Need Help Bad!!!




Advanced Search
Quick Reply: gearing on cbr600rr


Reply Closed Thread Share

All times are GMT -4. The time now is 03:34 AM.