WTF racing 905...
07-10-2006, 12:10 PM
#41
dedrater
Join Date: Oct 2002
Location: Lewiston, Me
Posts: 9,815
Re: WTF racing 905...
Originally Posted by Ryan S
i broke a couple on the stator cover side...i welded the triangle solid and haven't had a problem since...i've talked to a couple people that run aftermarket rearsets and say the never break.....i didn't know how that could be possible, i thought that have a peg that folded up would help tremendously from breaking the rearset.....not true, i droped my bike pretty hard today with aftermarket rearsets and they didn't even bend! vertical joe told me that you can bend them back if they bend on you too.....
I used the woodcraft brackets and some aftermarket folding pegs, you have to use red loctite to keep the pegs from rotating but after that they are pretty close to bullet proof. I have seen the solid pegs hold up really well too.
That was one of the first things to be changed when I set up my 636
07-10-2006, 12:16 PM
#42
Registered User
Join Date: Jun 2004
Location: Toronto
Age: 42
Posts: 3,289
Re: WTF racing 905...
Originally Posted by verticaljay
I used the woodcraft brackets and some aftermarket folding pegs, you have to use red loctite to keep the pegs from rotating but after that they are pretty close to bullet proof. I have seen the solid pegs hold up really well too.
That was one of the first things to be changed when I set up my 636
That was one of the first things to be changed when I set up my 636
07-10-2006, 01:36 PM
#44
dedrater
Join Date: Oct 2002
Location: Lewiston, Me
Posts: 9,815
Re: WTF racing 905...
Originally Posted by JohnnyP
I have woodcrafts with their solid pegs on my 636, Im running those with an MXD cage and some rear axle sliders I got off Ebay. When the sliders on the cage and axle are fairly new the pegs dont even touch the ground on either side...
The swingarm sliders sound like a good idea, does it save the pipe too? I hate it when mine falls off.
07-10-2006, 01:55 PM
#47
Registered User
Join Date: Jun 2004
Location: Toronto
Age: 42
Posts: 3,289
Re: WTF racing 905...
Originally Posted by verticaljay
The swingarm sliders sound like a good idea, does it save the pipe too? I hate it when mine falls off.
07-10-2006, 06:00 PM
#48
Registered User
Join Date: Sep 2004
Location: Austin,Tx
Age: 42
Posts: 2,516
Re: WTF racing 905...
my 905 held up well the welds cracked so I just rewelded everything and never had a problem after that...I don't think the welds should crack but offerall it saved my bike from being thrashed numerous times...
07-10-2006, 06:54 PM
#49
Registered User
Join Date: Sep 2004
Location: upstate Nu Yourk
Age: 40
Posts: 805
Re: WTF racing 905...
every 905 cage we get we just grind the welds down a little, reweld, put a couple of gussets and skateboard wheels as sliders and there good to go...
as far as the rearset problem goes, we just cut the pegs down a little. i havent broken a rearset since 04
as far as the rearset problem goes, we just cut the pegs down a little. i havent broken a rearset since 04
Thread
Thread Starter
Forum
Replies
Last Post
melrosemoto
Bike Parts for Sale
1
01-09-2016 08:30 AM
