Hand Brakes
#21
Re: Hand Brakes
yeah definetly don't change ur system if it works! thats all that matters but i ran a 02 r6 master and a rc51 brake master n both felt like crap and were bled correctly n all, on my radial i bled it so good it'd move a inch n presurize the line fully so i had to crack the bleeder and let air in... now it compresses nicely and still lots of room from bottoming out @ tire lock up.
#22
Re: Hand Brakes
Originally Posted by john LegionST
lever and master is a STOCK 03-04 636 unit flipped up-side-down. works PIMP!!! GSXR, R6, actually a lot of front brake masters with remote res., work great too!
here's some pics, not the best but it's all i have right now
here's some pics, not the best but it's all i have right now
Good deal...thanks for the pics John
Tim
#23
Re: Hand Brakes
Originally Posted by john LegionST
www.gptechllc.com
cheapest HB out, works GREAT, i can lock my rear with one finger with a normal 03-04 636 front brake master, no need for radial mount or anything!
ask for geoff and tell him i sent you over and he'll hook you up with a good deal on a stunt kit (adapter, line, bajos and washers, everything you need except the master)
cheapest HB out, works GREAT, i can lock my rear with one finger with a normal 03-04 636 front brake master, no need for radial mount or anything!
ask for geoff and tell him i sent you over and he'll hook you up with a good deal on a stunt kit (adapter, line, bajos and washers, everything you need except the master)
#24
Re: Hand Brakes
Originally Posted by alexcod
Full Throtle Rear Master And Brembo Front Master 16 X 18 Mm, Best Sh*t For The Money , You'll Spend A Little More But Worth Every Pesso !
#26
Re: Hand Brakes
Originally Posted by john LegionST
www.gptechllc.com
ask for geoff and tell him i sent you over and he'll hook you up with a good deal on a stunt kit (adapter, line, bajos and washers, everything you need except the master)
ask for geoff and tell him i sent you over and he'll hook you up with a good deal on a stunt kit (adapter, line, bajos and washers, everything you need except the master)
#27
Re: Hand Brakes
Originally Posted by john LegionST
www.gptechllc.com
cheapest HB out, works GREAT, i can lock my rear with one finger with a normal 03-04 636 front brake master, no need for radial mount or anything!
ask for geoff and tell him i sent you over and he'll hook you up with a good deal on a stunt kit (adapter, line, bajos and washers, everything you need except the master)
cheapest HB out, works GREAT, i can lock my rear with one finger with a normal 03-04 636 front brake master, no need for radial mount or anything!
ask for geoff and tell him i sent you over and he'll hook you up with a good deal on a stunt kit (adapter, line, bajos and washers, everything you need except the master)
Bled mine once after the initial install. Haven't had to do anything but use it for the last 5+ months. Locks up 1 finger. I paid $100.00 for mine since had my own master cyl. (GSXR1000 flipped upside down) No dual caliper required! 1 line only, 1 fluid reserv. for handbrake and foot brake.
GPtech keeps it simple and cheap!
#28
Re: Hand Brakes
Originally Posted by john LegionST
www.gptechllc.com
cheapest HB out, works GREAT, i can lock my rear with one finger with a normal 03-04 636 front brake master, no need for radial mount or anything!
ask for geoff and tell him i sent you over and he'll hook you up with a good deal on a stunt kit (adapter, line, bajos and washers, everything you need except the master)
cheapest HB out, works GREAT, i can lock my rear with one finger with a normal 03-04 636 front brake master, no need for radial mount or anything!
ask for geoff and tell him i sent you over and he'll hook you up with a good deal on a stunt kit (adapter, line, bajos and washers, everything you need except the master)
#29
Re: Hand Brakes
Originally Posted by Padros
I saw those full throttle rear masters. Can I ask why people use them? I've never had a problem on any of my bikes with the stock rear master?
#30
Re: Hand Brakes
Originally Posted by MikeOnTheBike
people use them because they think it's the only way. they don't understand that it is working just like a normal stock one works. the spot where the handbrake hooks up on a full throttle unit is the same place where the resevoir hooks up on a stock unit. you can make a full throttle unit work just like a stock one with a resevoir hooked up where the handbrake line goes. it is a cool looking billet master though, but that's all it is, nothing new. I was about to machine an adapter for my stock unit till I found the GP tech fitting and made the decision that 55 bucks for the fitting was a better deal than burning up my time to machine my own.
yo, is this big mike (900rr) from the north?? Rio linda
#31
Re: Hand Brakes
Originally Posted by 287ridah
+1
yo, is this big mike (900rr) from the north?? Rio linda
yo, is this big mike (900rr) from the north?? Rio linda
#32
Re: Hand Brakes
Originally Posted by MikeOnTheBike
yup yup, I know that bike in your avatar, Alex? it's been awhile, lost that cell phone. PM me with your digits and we'll ride, we trailer everywhere now, too much heat these days. you were there the day I looped out that 70MPH coaster off of bell huh? we got some cool footage of you that day also.
what up man. yeah that coaster crash was insane. still cant believe you came outta that with only a scratch. That 900 is a savage....i gotta get one.
pm sent
#33
Re: Hand Brakes
Originally Posted by 287ridah
haahahhaaah
what up man. yeah that coaster crash was insane. still cant believe you came outta that with only a scratch. That 900 is a savage....i gotta get one.
pm sent
what up man. yeah that coaster crash was insane. still cant believe you came outta that with only a scratch. That 900 is a savage....i gotta get one.
pm sent
#34
Re: Hand Brakes
Originally Posted by john LegionST
lever and master is a STOCK 03-04 636 unit flipped up-side-down. works PIMP!!! GSXR, R6, actually a lot of front brake masters with remote res., work great too!
here's some pics, not the best but it's all i have right now
here's some pics, not the best but it's all i have right now
Its tough to see in those pics. You runnin the brake on the top?
10 Degree clip ons or 0 degree? They don't hit the upper at all?
#35
Re: Hand Brakes
Originally Posted by skinnyR!
Its tough to see in those pics. You runnin the brake on the top?
10 Degree clip ons or 0 degree? They don't hit the upper at all?
10 Degree clip ons or 0 degree? They don't hit the upper at all?
Yeah i run the HB on top, prolly the last person still doing that?!?!?!
I have two bikes, one has FI 0 degree, other has upsidedown woodcrafts (i think they're 7 degree) and im going to get FI's for the other bike and get rid of the woodcrafts.
No problems with either hitting the upper on the 636. all you have to move (at least with the master cyl i used) is the guage, it hase to be moved to the right about an inch or so, no big deal.
#36
Re: Hand Brakes
Thanks heaps everyone for the responses! I ended up buying a clip locally like the one's moto-heaben sell with their kits that lets you run another line to the stock rear master. Now I'm just going to hunt for the best master that I can find for my $$. Not sure if I need radial but heaps of cats on SL keep going on about how good they are. I'll see what my local wrecker has!
I been told to look for 19X16??
I been told to look for 19X16??
#37
Re: Hand Brakes
#40
Re: Hand Brakes
hey, I just got the 1000rr radial master, and have the clutch lever for my brake on my bike now, {from FT} it works pretty good, should i be in a big hurry to put the radial on? is it that big a difference?
Thanks
Thad
Thanks
Thad