FHL

i have woodcraft clip ons flipped upside down , with the tubes almost all the way out, just enough to mount my hb on the left side on the end of the tube, and about a couple inches in from straight

whats the best setup for learning circles, is stock position better?

Borne

The further out they are the more leverage you have to twist the bike around. That being said, dirtbike bars are the easiest, with aftermarket clip-ons coming next, then stock clip-ons pushed out, and regular stock set-up being the hardest.

FHL

i find aftermarket clip ons way more comfortable than dirtbars, and i previously had them at stock length, so i'll try them at full length and see how it goes..

the reason i asked is not because of leverage, but if i was to put them to stock i would be able to stay on top of the bike easier

FHL

check this out, i turned my clip ons so they're straight out, and moved the tubes out as far as they go...

i went out, instead of pulling up wheelies and having to slow it down, i now clutch straight into circle speed, and i'm way smoother on the brake, i can ride it at stalling speed forever without stalling, turning into circles is a breeze, and i've never rolled a stoppie in my life but i'm getting like 100 feet after a couple tries...


this setup is definitely better, all though doesn't look as good or feel as good to me at least the leverage is worth it.

DoodleF4i

stock postion..thoseo ut clip ons are as gay as dirtbars

DECEPTICON13

u went from popping the rear tire up at a dead stop to rolling 100 feet in 4 days i really doubt it .

kid was doing squid endos at the spot saturday, now hes rolling 100 foot stoppies. damn i wish i had his skill of learning ****.


you learn faster than darius

DoodleF4i

i learned pop stoppies to 125+ on my 750 in a day..its a matter of ***** less than skills..just a matter of pulling the bike a little higher and going faster each time..and ps out clip ons are gay still

Armenian

After you flip them upside down swap sides (left-->right, right-->left)

I got my Woodcraft pieces like this and it works great.

DoodleF4i

his are like that...when i ride his bike i feel like im streched out..the up side down is ok but the straight out **** is whack

Z-UNIT

yah fhl dont have em straight out have em in like a 1/2inch or inch...i luv ti like that, but i hate DB bars.....and i beleive the 100ft thing, 100 ft is not that far ,me and anthony were ****in around one day comin in top of first with gearing and rolling liek 60 ft..and they were power stoppies...keep goin fhl

felonyfreestyle

like u were scraping frog flamingos?????????????? ***

felonyfreestyle

subframe!!!!!!! oh wait u have a bar 2 dont ya

Suicidl

i have db bars and had a f4i set up with stock clip ons and once you get circles down they fell the same to me. except for the clip ons turned out www.wannabedirtbars.com those are gay either do it or dont. i hate db bars blah blah blah so i turn my clip ons upside down and out Fagggggggggggggggggggs

thehate.

im stock never tryed DB dars don't think I will any time soon..im kinda afraid I wont like them

FHL

right, my brakes were barely bled good enough to stop, that's why i was "popping" stoppies.

and you know nothing about stunting, go back to doing 60mph combos in a parking lot almost running into people

FHL

you sit in your jeep more than you ride

Suicidl

whats wrong with Combos

i like them the best:YEAH

FHL

cuz the lot small

DLISH

Oh ****!

Suicidl

Oh ****!

the cheese and pretzel are Dlish :YEAH